The WSI Offering

WSI takes on projects and delivers results.

We do not send out consultants to enhance other organizations. That would make our own organization weaker. We are staffed as a team and we provide our services as a team, this is the core of our offering.

 

Compared to a traditional Consultant solution we approach the problem with a wider knowledge base.

HOW WE WORK

We work in phases (sprints).

Each sprint has it´s deliverables and those are set in close cooperation with our client to ensure no time is spilled.To develop, industrialize and produce electronics (especially when it includes radio) can be a tough challenge. There are different regulatory conditions all over the world that need to be considered in the early phase of the project to avoid ending up in dead end streets.

  • Definition

    Draft versions of:
    Requirements specification
    Design specification
    Test specification
    Timeplan
    Budget (NRE/Fee's)
    Product cost analysis
    Risks

  • Design & Development

    Released documentation:
    RS, DS, TS, NN
    Updated time plan
    Updated budget (NRE+Fee's)
    Risk update

  • Engineering Prototype

    First working prototype:
    Verify design approach
    HW, SW, MECH etc
    Regulatory precompliance
    Friendly user trials

  • Factory Prototype

    First build in factory:
    Regulatory test
    Field trials
    Yield optimization

  • Mass production

    Volume deliveries:
    Maintain quality
    Cost reduction initiatives
    Monitor end of life

Advanced radio & antennas

Great wireless connections need great antennas

We have more than 40 years experience of designing custom antennas…

CHECK IT OUT

THE PEOPLE BEHIND WSI

We are a team of great persons and personalities. We like to work and take pride into our accomplishments.

team_image
CEO

Jan-Åke Lindqvist

Responsible for finding new projects with new exciting technologies and customers.
Other: Business enabler and master of networking.

team_image
COO + R&D Manager

Jonas Strandell

Project management focusing on turnkey projects with manufacturing in Asia

Education:
M.Sc. in Engineering Physics
Degree of Licentiate of Science in Signal Processing and Adaptive Antenna Technology

Other:
Race car driver and semi-professional cross country skier.

team_image
CTO and Chief architect

Håkan Ohlgren

Active from Feasibility phase through the whole project.

Education:
KTH, Royal Institute of Technology

Personal Interest:
Mountainbiking

team_image
Deputy COO + PM

David Arnell

Turnkey project manager with experience from many IoT projects.
Passionate basketcoach.
Education:
B.Sc. in Computer and Electrical Engineering.

team_image
HW & SW Engineer

Alexander Bergslilja

Works with product development and test development.
Vast experience with Bluetooth both HW and SW.
Former pro golfer.
Education:
M.Sc. in Engineering Physics

team_image
Production Manager + CAD

Lars Kalén

Production manager and Layout responsible. Enjoys travelling!
Education:
Technical college graduate

team_image
Senior antenna engineer

Pär Berglund

Responsible for the high tech antenna Voodo work.
Enjoys golf in the sparetime.
Education:
M.Sc. in Engineering Physics

team_image
HW Architect

Tomas Lannér

Active from Feasibility phase, design phase and support during the PCB layout phase.
Experience in reviewing of HW designs.

Education:
M.Sc. Computer Science, LTH in Lund

team_image
HW & SW Engineer

Joakim Sandström

Primarily a circuit engineer, layout artist and Altium Ninja. Also skilled in MCU programming and test scripting (python).

Education:
(Almost finished) M.Sc. in Electrical Engineering

team_image
Senior RF Designer

Viktor Kouznetsov

RF and MW front end and antenna design

Education:
Ph.D. in Microwave Technology and Solid State Physics.

team_image
Project Manager

Roman Fedirko

Turnkey project manager that often visits the factories.
Education:
Master of Science EE in Wireless Communication Systems
Ongoing MBA degree in Industrial Management and Economics

team_image
HW & SW Engineer

Viktor Styrud

Software and firmware development

Education:
M.Sc. in Engineering Physics specialized in Embedded Systems

team_image
Test & Verification engineer

Tarek Deri

Lots of experience from testing and testplanning/design. Especially with regards to Cellular and GPS.

team_image
Senior project manager

Ola Hellström

Passioned about running multidisciplinary projects from pre-study to launch.
Education: M.Sc. Mechatronics
Interests: My family, hiking, Badminton, Karate

team_image
Office Manager

Pia Carlén

Makes sure everybody in the team can get their job done, solves all the everyday problems.
Education:
Project Management at IHM

team_image
Senior RF Designer

Fredrik Thorsell

Loves the real RF challenges that requires new ways of thinking. Passionate woodboat owner.
Education:
M.Sc. in Electrical Engineering

team_image
HW Designer + CAD

Mickael Brandt

Involved in many of the HW designs also a skilled cad engineer.
Enjoys racing (RC).
Passionate about all forms of competitions.
Education:
(Almost finished) M.Sc. in Electrical Engineering

team_image
Senior RF Designer

Michael O´Hearn

Wireless system designer focusing on providing optimal solutions for our customers
Education
M.S.E.E in Wireless System and Microwave Design, Santa Clara University
B.S.E.E. in Analog and RF Design, Georgia Institute of Technology.
Endurance runner with Texan origin.

team_image
Wireless Specialist

Patrik Dai Javad

On top of all existing Wireless protocols.
Passionate golfer.
Education:
M.Sc.EE (1994, Lund Institute of Technology)

team_image
Senior project manager

Jens Barkvall

Turnkey project manager with experience from many consumer electronics and IoT projects.
Interests: Family, hunting, biking and tennis.
Education:
M.Sc. in Mechatronics

team_image
Senior project manager

Tomas Pensjö

Long project management experience from automotive and telecom industry. Background in HW design.
Education:
Technical college graduate.
IPMA certification.
Other:
Love sailing, both boards and boats.

team_image
Senior project manager

Lars Wattsgård

Project manager with roots in SW dev of RF and baseband test / calibration in mobile phones. Long manufacturing experience, whereof eight years in Beijing.
Education: M.Sc.E.E. & MBA
Interest: To meet people, cultures and technology. Likes to eat.

team_image
Senior Mechanical Design Engineer

Daniel Bodin

Vast experience in product management, development, design and manufacturing.
Loves to develop products that contribute to usability, benefits the user and provides good quality.
Education:
Technical college Nackademin
Interests: Stockholm archipelago, traveling and Bolgheri wine.

team_image
IT

Andreas Antonini

Overall IT Specialist.

team_image
Chairman

Lars-Åke Wernersson

Industry veteran with global experience.

team_image
Board member

Björn Lindblom

Serial entrepreneur within the IoT Industry.

team_image
Board member

Mats Eliasson

He is the analyst and business growth pro who has been working behind the scenes of small and large listed companies for almost 30 years.

team_image
Finance

Agneta Åberg

Handles all the financials. Passionate about travelling.

HISTORY

Wireless products since 2002

We have long experience from delivering complex projects. Very often we are involved from the idea phase all the way to volume production. Given our years of operation and the number of projects we have completed we have one of the most experienced teams when it comes to connected mobile products.

2003

We released the UMTS-TDD PCMCIA card, for our customer IP Wireless.

2004

We developed the Mobitex – Bluetooth Mobile Gateway for Ericsson.

2005

We developed a Mobile Broadband Gateway for IP Wireless.

2006

The launch of AMR Systems for Commet, Metrima and iProbe.

2007

Development of a custom Golf PDA equipped with a custom radio and positioning system

2008

The first launch of Room Manager – Conference room booking system for Evoko.

2009

3 Sector WiFi Basestation was developed for Nokia Siemens Networks

2010

We developed Spirocom – an intercom for firefighters for Interspiro.

2011

We made integrated antenna solutions and various smart home solutions for FLIR.

2012

The first launch of the Point to multipoint Transmission system for VNL.

2013

Evoko Minto – High end conference phone for Evoko.

Multisensor IoT System for confidential customer.

2014

Hydrogene fuel cell charger for MyFC.

Full custom BLE Beacon for for Accumulate.

2015

Selfcontained Head mounted VR-Display GameFace.

Flic for ShortcutLabs.

Apple Pay ready POC for Accumulate.

2016

Named partner by NVIDIA®.